Polaroid OneStep2 User Manual page 9

Box contents
01 OneStep 2 Camera
02 USB Charging Cable
03 User Manual
04 Camera Neck Strap
How to use
the OneStep
Charge the camera
Important The OneStep 2
will not be fully charged upon
purchase — it should be fully
charge the camera, plug the
USB charging cable into the Mi-
cro-USB slot on the camera's
back panel, and the other end
of the cable into a charger,
such as a smartphone adapter
or your computer's USB slot.
The red flash charge LED will
turn off when the battery is
fully charged.
A full charge usually takes
about 2 hours through a wall
socket with a smartphone
adapter, or up to 4 hours
through a computer's USB
slot. A fully-charged OneStep 2
camera will have enough pow-
er to shoot 15-20 packs of
Remember to turn your camera
off after every use to conserve
battery life.
charged before first use. To
film, depending on usage.
1. Turn the
camera on/off
To turn the camera on,
slide the power switch into the
charging LED on the back panel
will start blinking to charge
camera will light up to indicate
that the camera is switched on.
To turn the camera off again,
return the power switch to the
OFF position.
facing up.
Note Please check indi-
development time, handling
and storage details.
the darkslide will eject from
the camera automatically,
ON position (down). The flash
the flash, and the remaining
film counter on the top of the
2. Load the film
Slide the film door latch
to open the film door. Push
the film cassette all the way
in, with the film's darkslide
vidual film packaging for
3. Close film door
When you close the film door,
underneath the film shield.
The plastic film shield is
designed to protect images
from light as they develop — it
should not be removed. Take
the darkslide out from under
darkslide has not ejected,
re-insert it, making sure it is
pushed all the way to the back
of the camera.
4. Set the Flash
& Lighten/Darken
Flash The camera flash will
trigger by default when you
shoot with the OneStep 2. To
ton on the back panel as you
press the shutter button.
Warning Shooting without
performance and picture
uations except brightly-lit,
sunny environments. We
recommend always shoot-
Lighten/Darken Use the light-
en/darken switch on the right
side of the lens barrel to adjust
the film shield and let the
film shield roll back up. If the
remove the film pack and
shoot without the flash, press
and hold the flash override but-
flash will reduce camera
quality in most lighting sit-
ing with flash.