Philips 42PFL3605/12 User Manual page 25

5
Press OK to begin search.
»
If a channel is unavailable at the
selected frequency, the system searches
for the next available channel.
6
Press BACK when the new channel is
found.
7
Press to select [Store as new
channel] to store the new channel under
a new channel number.
8
Press to enter [Store as new channel].
9
Select [OK], then press OK to store the
new channel.
10
Press MENU to exit.
Step 3 Fine-tune analogue channels
1
Press MENU.
2
Press to select [Setup] > [Installation] >
[Channel installation] >
[Analogue: Manual].
»
The [Analogue: Manual] menu appears.
3
Press to select [Fine-tune], then
press to enter.
4
Press to adjust frequency.
5
Press OK to confirm.
6
Press to select [Store current
channel] to store channel number.
7
Press to enter [Store current channel].
8
Select [OK], then press OK to store
current channel.
9
Press MENU to exit.
Skip channels
1
When watching TV, switch to the channel
you want to skip.
2
Press MENU.
3
Press to select [Setup] >
[Installation] > [Channel installation] >
[Analogue: Manual].
»
The [Analogue: Manual] menu appears.
4
Press to select [Skip channel], then
press to enter.
5
Press to select [Yes], then press OK
to skip current channel.
»
The selected channel is skipped when
you press P +/- on your remote
control or view from the channel grid.
6
Repeat the previous steps to skip more
channels.
Tip
•
Press the Numeric buttons on the remote
control to access the skipped channel.
•
To access the skipped channel, repeat steps
1-5 and select [No] to restore.
EN 23