Operation - Azusa MIK046 Owner's Manual

MIK0146 / MIK0147
Microphone
1 Grill
2 Power indicator

OPERATION

1. Connect one end of the AC/DC adapter to power mains
and the other end to the receiver's DC input.
2. Press the power button on the receiver to turn it on.
The power indicator on the receiver will turn red.
3. Spread out two antennas completely.
4. Connect this receiver to an external device (e.g amplifier) with
a proper cable.
EN
5. Before turning the microphone on, make sure there are batteries
inserted in the microphone battery compartment. Move the power switch up
(to highest position) to turn it on.
6. Once the microphone is on, the RF signal indicator of the respective
channel will turn on. It shows having the available signal. When speaking
to the microphone AF audio indicator will light up too.
Microphone battery replacement
Change batteries whenever you notice the sound quality has deteriorated, the
signal is unstable or the effective distance has shortened.
1. Twist off the cover counterclockwise to remove it.
2. Lift up the bar above the battery compartment.
3. Insert 2 AA batteries. Pay attention to correct polarity.
4. Close the bar and twist back the battery cover in place.
10
Power switch (ON/Mute/OFF)
3
Note: mute function is optional
4
Battery cover
oWner's manual