Subscribe to Our Youtube Channel
Related Manuals for Clarke CSB20B
Summary of Contents for Clarke CSB20B
- Page 1 SHOT BLAST CABINET SHOT BLAST CABINET MODEL No. CSB20B Part No. 7640110 1001 OPERATING & MAINTENANCE INSTRUCTIONS...
- Page 2 Please note that the details and specifications contained herein, are correct at the time of going to print. However, CLARKE International reserve the right to change specifications at any time without prior notice. 2 - comprising; cable, transformer with 3-pin plug and connector.
-
Page 3: Parts Diagram
PARTS DIAGRAM Thank you for purchasing this CLARKE Shot Blast Cabinet which is designed for professional, workshop use. Please read this booklet thoroughly and follow the instructions carefully, in doing so you will ensure the safety of yourself and that of others around you, and you can look forward to the Shot Blast Cabinet giving you long and satisfactory service. -
Page 4: Troubleshooting
FEATURES TROUBLESHOOTING The 3 cu ft cabinet is lit by a low voltage (12 volt) fluorescent tube. A transformer is provided which should be plugged directly into the mains supply. The attached CAUSE PROBLEM REMEDY cable is then plugged into the switchbox, mountred on the left side of the cabinet. The switchbox contains the ON/OFF rocker switch. -
Page 5: Maintenance
Carefully unpack the unit, and check to ensure that no damage was caused in hose, rubber gloves and abrasive pick-up. transit. Should any damage be apparent, please contact your Clarke dealer immediately. Remove all components from inside the cabinet, and check them Ensure the air vent foam filter is in place. -
Page 6: Operation
Replace the grid, ensuring the feet face NOTES: Fig.4 downwards with the cut away section at T here are no hard or fast rules governing nozzle sizes and air pressures used with the right hand rear of the cabinet. The different abrasives.
Need help?
Do you have a question about the CSB20B and is the answer not in the manual?
Questions and answers