Quax Combi bed Manual page 25

COMBI
54 01 34xx
Step 6 : Use both legs 1 and 2, the parts of step 5, four connectors H2 and the hexagonal key L
Tighten the connectors (H2) in the provided openings on the innerside of the leg panels (1 and 2). These
are the same of the cot out of step 1 but rotated by 90°. Take away all the hardware for the baby bed and
keep it in a safe place. Push the bed sides (5) with its wooden dowels in the provided openings of the head
and foot panel and over the connectors. Tighten the eccentrics.
Step 7 : Use the parts of step 6, the bottom 7 and six wood screws I
Place the mattress support (7) into the bed and let it rest on the supports of the long sides. Insert the wood
screws (I) in the provided openings on the bottom and fi x into the supports.
Doorgroeibed
120/60-200/90
Combi Bett
120/60-200/90
Lit transformable
120/60-200/90
Combi bed
120/60-200/90
Quax
First dreams
®
First steps
25