Video Recorder - Philips 20PF5320F/58 User Manual

Connecting peripheral equipment
The television has 2 external sockets situated at the back of the set (EXT1 and
Source List
EXT2) and sockets on the side. Press the
TV Æ
Source List
EXT 1 Æ
equipment connected to
EXT2 / SVHS2 Æ
AV / SVHS3 Æ The EXT1 socket has audio, CVBS/RGB inputs and audio, CVBS outputs.
PC Æ
The EXT2 socket has audio, CVBS/S-VHS inputs and audio, CVBS outputs.
HD Æ
The side connections has audio inputs, CVBS/S-VHS inputs, headphone out.

Video recorder

12
and select TV or peripheral
EXT1, EXT2/SVHS2, AV/SVHS3, PC
DVI In DVI EXT 2 / SVHS2
Audio In
Carry out the connections shown opposite, using a good quality
euroconnector cable.
If your video recorder does not have a euroconnector socket, the only
connection possible is via the aerial cable.You will therefore need to
tune in your video recorder's test signal and assign it programme
number 0 (refer to manual store, p. 6).
To reproduce the video recorder picture, press
Video recorder with decoder
Connect the decoder to the second euroconnector socket of
the video recorder.You will then be able to record scrambled
transmissions.
key on the remote control to display
AV
or
HD
*
EXT 1 75
:
key.
0
.
Headphone