Setting The Regulator - Igloo Kegorator IBK49BK Instruction Manual

SETTING THE REGULATOR

The Regulator connects the CO 2 Tank to the CO 2 Line, while measuring
PSI (pounds per square inch) and the volume of CO 2 in the tank. Set the
Output Pressure Gauge between 8-12 PSI for a nice, frothy head.
Overview
Pressure Dial: Adjusts
Output Pressure Gauge:
the output pressure Measures PSI of CO 2
(loosen set screw outflow from CO2 Tank
with Allen Wrench) to Keg (0-60 PSI)
Connects to
CO 2 Tank
CO 2 Shut Off Valve:
Pressure Relief Valve
(shown in open position)
(PRV): Allows gas to
flow through Regulator
to obtain an accurate
pressure reading.
Connects to
CO 2 Line
14