Tap Tower Installation; Attaching Coupler To Tap Tower - Igloo Kegorator IBK49BK Instruction Manual

TAP TOWER INSTALLATION

1. Remove all packing tape from the Tap Tower.
2.
Guide the Tap Tower Washer up the tap
tower hose and let it sit on the top of the
cabinet. Then feed the tap tower hose
through the hole in the top of the cabinet.

ATTACHING COUPLER TO TAP TOWER

1.
Remove & discard
Insert (rounded
side down)
Remove the packing spring and Backflow
Stopper from inside the Keg Coupler,
then reinsert the Backflow Stopper into
the Keg Coupler (rounded side down).
3.
9
3.
Tap Tower
Tap Tower
Washer
Align the notches at the bottom
of the tower with the hole in the
top of the cabinet, then insert and
twist the tower clockwise to lock
it into place (about a ¼ turn).
2.
Remove the black packing cap from
the top of the Coupler, then place the
Top Coupler Washer flush and centered
on the top of the Keg Coupler.
After the Tap Tower has been placed
on top the cabinet and the hose line
feeds through the bottom, attach
the wing nut to the Keg Coupler.