Ce Declaration Of Conformity - Fermax 5296 Installer Manual

Cod. 970071 V12_17
Connections
Connection is made through the wiring from the rear, which is connected directly to a Wiegand controller (+, -, D0, D1,
LED-G, BEEP-BUZ-BZ).
Cable colour
Red
Black
Green
White
Brown (optional)
Yelow (optional)
Read Card
External LED Control
External Buzzer Control
Maintenance
FACTORS INFLUENCING THE OPERATING DISTANCE
Orientation of the proximity key. Faulty reader supply. Interference on the 13.56 MHz band and 125Khz.

CE DECLARATION OF CONFORMITY

Hereby, FERMAX ELECTRONICA, S.A.U., declares that this PROXIMITY RESISTANT REF. 5296, is in compliance with the
essential requirements of Directive RED 2014/53/UE and Directive RoHS 2011/65/UE. See website www.fermax.com.
FERMAX Avd. Tres Cruces, 133, 46017 Valencia, Spain.
http://docweb2.fermax.com/docs/deconformidad/EN/F05296.pdf
Connection Diagram
Signal
+
GND
D0
D1
Green Control led LED-G
Buzzer BEEP-BUZ-BZ
The LED light will turn into Green, and the buzzer sounds a
beep, at the meantime, the reader outputs the Wiegand signal
When the input voltage for LED is low, the LED will turn into
Green
When the input voltage for Buzzer is low, the Buzzer will
sound
4