LG G7100 Service Manual page 137

10.1.5 Vibrator
This menu is to test the vibration mode.
1) Vibrator on : Vibration mode is on.
2) Vibrator off : Vibration mode is off.
10.1.6 ADC (Analog to Digital Converter)
This displays the value of each ADC.
1) MVBAT ADC : Main Voltage Battery ADC
2) AUX ADC : Auxiliary ADC
3) TEMPER ADC : Temperature ADC
10.1.7 BATTERY
1) Bat Cal : This displays the value of Battery Calibration. The following menus are displayed
in order : BAT_LEV_4V, BAT_LEV_3_LIMIT, BAT_LEV_2_LIMIT,
2) TEMP Cal : This displays the value of Temperature Calibration. The following menus are
displayed in order : TEMP_HIGH_LIMIT, TEMP_HIGH_RECHARGE_LMT,
BAT_LEV_1_LIMIT, BAT_IDLE_LI MIT, BAT_INCALL_LIMIT,
SHUT_DOWN_VOLTAGE, BAT_RECHARGE_LMT
TEMP_LOW_RECHARGE_LMT, TEMP_LOW_LIMIT
- 139 -
10. ENGINEERING MODE