Symptom
TV not respond-
ing to the remote
control
One or a few
tiny spots on
the screen that
do not change
colour along with
the video picture
Intermittent or
flickering picture
in HD mode
No sound or pic-
ture but the red
light on the front
panel is on
PC modes do not
work
S-Video colour
becomes faint
Black bar on the
top and bottom
of the screen in
PC mode
EN-32
Possible solutions
•
Move closer to the receiver at the front of the TV screen
•
Check the +/- direction of the batteries in the remote control
•
Change the batteries in the remote control
•
This symptom is not a problem. The liquid crystal panel is built with
very high precision technology giving you the fine picture details.
Occasionally, a few non-active pixels may appear on the screen as a
fixed point of red, blue, green or black.
•
This does not affect the performance of the set.
•
Noise is displayed if the digital equipment fails. Digital equipment can
include a DVD player or set-top box. Check the user manual of the
digital equipment you are connecting.
•
Use a standard-compliant (high-quality) HDMI to DVI cable.
•
Press the
key on the remote control.
•
Check whether connections are correct. (See page 29.)
•
Check whether the source is correctly selected by pressing the
button to enter the source list and selecting the correct
source.
•
Check whether you have configured the computer to a compatible
display resolution
•
Check the graphic card setting of the PC.
•
Check whether the SVHS cable is properly connected.
•
Press the P + key on the remote control to do a channel up, and
then press the P – key to do a channel down.
•
Change the PC refresh rate to 60 Hz.