Connecting Two Vcrs, A Vcr And A Dvd Recorder; Connecting With Eurocables; Connecting A Satellite Receiver; Connecting With A Eurocable - Philips 26PFL5322/10 User Manual

Connecting two VCRs, a VCR and
a DVD recorder

Connecting with Eurocables

1. As shown in the fi gure below, connect
aerial cables 1 and 2.
2. Connect the VCRs or DVD-recorder
to EXT1 and EXT2 with the Eurocables 4
and 5.
3. Press the key on the remote con-
trol display Source list.
Press the ï key to select EXT1 or EXT2
4.
and press the Æ /
your selection.
Connecting with aerial cables only
1. As shown in the fi gure below, connect
aerial cables 1, 2 and 3.
2. Tune in the recorder's test signal and
store the test signal in programme
number 0. For information, see Manual
Store on page 10 and the user manual of
your recorder.
Cable
Bottom of TV
1
3
Recorder
key to confirm
Rear of TV
5
4
2
Recorder

Connecting a satellite receiver

Connecting with a Eurocable

1. As shown in the fi gure below, connect
aerial cables 1 and 2.
2. Connect the satellite receiver
to EXT1 and EXT2 with Eurocable 3.
3. Press the key on the remote con-
trol display Source list.
Press the ï key to select EXT1 or EXT2
4.
and press the Æ /
your selection.
Bottom of TV
1
2
Satellite receiver
Connecting with component video
connectors
For information about how to connect a
satellite box by using Component Video con-
nectors, see Connect a DVD player, a satellite
receiver or a cable box on page 28.
key to confirm
Rear of TV
3
EN-27