Language Settings - Philips 46PFL5507T/12 User Manual

Add and remove satellites
You can add or remove satellites at any
time, and install channels from new satellites.
Note: Before you add satellites, make sure
that the connection type is correct. See Set
up your TV > Satellite Settings > Install
satellite channels (Page 39).
> [Setup] > [Search for
1. Press
satellite], and press OK.
2. Select [Add satellite], then press OK.
The TV searches for a satellite on the first
free LNB. This can take several minutes. If no
satellite is found, check the antenna
connections and the position of the dish
antenna.
3. If no satellite is found, select [Search] to
scan again or [Next LNB] to skip to the
next LNB.

If there are no free LNBs available,
remove a satellite first.

If you are satisfied with the added
satellite, install the channels.
4. To install all channels, select [Install]. The
installation can take several minutes.
Remove a satellite
> [Setup] > [Search for
1. Press
satellite].
2. Select [Remove satellite], then press OK.
3. Select the satellite you want to remove
and press OK.
The satellite and its channels are removed
from the installation.

Language settings

Menu language
1. While you watch TV, press .
2. Select [Setup] > [TV settings] >
[Preferences] > [Menu language].
3. Select a menu language from the list, then
press OK.
EN 40
Audio language
If the TV channel broadcasts multiple audio
languages, you can select the preferred audio
language.
1. While you watch TV, press
2. Select an option, then press OK.

[Audio language]: Select the audio
language for digital channels.

[Dual I-II]: Select the audio language for
analogue channels.
Audio languages for digital channels
For digital channels with multiple audio
languages, you can select the default audio
language that is broadcast.
1. Press .
2. Select [Setup] > [Channel settings] or
[Satellite settings] > [Languages].
3. Select a setting, then press OK.

[Primary audio]: If this language is
broadcast, it is selected by default.

[Secondary audio]: If the primary audio
language is not broadcast, select this
language.
Subtitles on analogue channels
1. While you watch an analogue TV channel,
press TEXT.
2. Enter the three-digit page number of the
subtitles page (usually '888').
If available, subtitles are switched on.
3. Press to exit text.
Subtitles on digital channels
1. While you watch a digital TV channel,
press OPTIONS.
2. Select [Subtitles], then press OK.
3. Select [Subtitles off], [Subtitles on] or
[On during mute], then press OK.
If you select [On during mute], subtitles are
displayed only when you press to mute the
sound.
Note: If an MHEG application is activated,
subtitles are not displayed.
OPTIONS.