Antenna And External Equipment Connection - Philips 24PFL6306/V7 User Manual

3

Antenna and External Equipment Connection

You can connect antenna, external equipment such as VCR, DVD player
and PC to your set. Examples are shown below.
ANT IN
ANT IN
L1 YPbPr1 R1 Av1
AV1
Note : Selecting a Source
Press SOURCE key on remote or on front panel keypad.
A source OSD will appear. Press Up/Down key on the remote or CH+ /CH- on
front panel can be used to select source. Press OK/Right key on the remote
or VOL'+' key from front panel to enter selected source or press SOURCE key
repeatedly to change and select source.
Press TV key on the remote to enter into TV source from any other source,
except USB source.
1. The aerial cable should not be bundled to the power cord.
COMPONENT (YCbCr/YPbPr) DVD INPUT
1. Connect the component outputs (YCbCr / YPbPr) of
DVD player to the component (YPbPr) input of the
the TV.
2. Connect audio outputs (L,R) of a DVD player to the
audio input (YPbPr) respectively.
3. Press the PLAY button on the DVD player.
VIDEO INPUT
1. Connect the component outputs VIDEO out
of VCR/Cable receiver to AV1, AV2.
2. Connect audio outputs (L, R) of a DVD player to the
audio input AV1, AV2 respectively.
3. Press the PLAY button on the VCR.
ANT IN
EN 5