Confirmation Of Firmware Version - Panasonic DMC-FZ20PP Service Manual

11 CONFIRMATION OF FIRMWARE VERSION

The Firmware version can be confirmed by ordering the following steps:.
· Step 1. The temporary cancellation of factory setting:
Set the mode dial to " P ".
While keep pressing BURST and " UP of Cross key" simultaneously. turn the power on with inserting the SD memory card
which has a few photo data.
· Step 2. Confirm the version:
Set the mode dial to " Playback ".
Press BURST and " DOWN
(The version information is displayed on the LCD with kight blue colour letters.)
<Point>
· The firmware version and EEPROM version can be confirmed with the information (1).
· The information (2), (3) are just reference.
DMC-FZ20PP / DMC-FZ20EB / DMC-FZ20EG / DMC-FZ20EGM / DMC-FZ20GC / DMC-FZ20GD / DMC-FZ20GN / DMC-FZ20SG
of Cross key" simultaneously. (No need to keep pressing.)
23