Install Channels; Automatically Install Channels; Manually Install Channels; Rename Channels - Philips 55PFL6556/V7 User Manual

6 Install channels

The first time you set up your TV, you are
prompted to select a menu language and to
install TV Afterwards, you can re-install and fine
tune channels.

Automatically install channels

1
Press .
2
Select [Setup] > [Search for channel],
then press OK.

Manually install channels

Step 1 Select your system
Note
•
Skip this step if your system settings are
correct.
1
Press .
2
Select [Setup] > [Channel settings] >
[Channel installation] > [Analogue:
Manual antenna installation].
3
Select the correct [Colour system] and
[Sound system].
Step 2 Search and store new TV
channels
1
Press .
2
Select [Setup] > [Channel settings] >
[Channel installation] > [Analogue:
Manual antenna installation] > *[Find
channel], then press OK.
• If you know the three-digit
frequency of the channel, enter it.
To search, select [Search], then
•
press OK.
3
When the channel is found, select
[Done], then press OK.
• To store the channel as a new
number, select [Store as new
channel], then press OK.
• To store the channel as the
previously selected channel, select
[Store current channel], then press
OK.
Step 3 Fine-tune analogue channels
1
Press .
2
Select [Setup] > [Channel settings] >
[Channel installation] > [Analogue:
manual install] > [Fine-tune], then press
OK.
3
Press to fine-tune the channel.
4
When fine tune is complete,Select
[Done],then press OK.

Rename channels

You can rename channels. The name appears
when you select the channel.
1
While you watch TV, press
» The channel matrix menu is displayed.
2
Select the channel to rename.
3
OPTIONS.
Press
» The channel options menu appears.
FIND.
EN 19