Dorel Juvenile Group COSCO Manual page 20

2. Attach Locking Clip
Thread both portions of the vehicle
belt onto the locking clip, as close to
the latch plate as possible.
3. Position Locking Clip
It should be about 1 in. (2.5 cm) from
vehicle belt's latch plate.
4. Rebuckle Vehicle Belt
33
5. Check Belt Tightness
Hold child restraint at the belt path
with your weakest hand.
Push and pull from side to side.
If it moves more than 1 in. (2.5 cm),
try reinstalling the child restraint or try
another seating location.
6. Tighten Tether
With knee in child restraint, push
firmly on the back of the seat and
tighten tether strap.
Remove the locking clip when the seat belt is not being
used with a child restraint.
34