Using In The Hd (High Definition) Mode - Philips 32PF7520D/10 User Manual

Using in HD (High Definition) mode
HD Mode
The HD (High Definition) mode allows you to
enjoy clearer and sharper pictures through the
DVI inputs if you are using a HD
receiver/ equipment that can transmit high
definition programming.
You must first of all connect the HD equipment
(see p. 18).
Choosing HD mode
& Press the AV key on the remote control to
display the Source List.
é Use the cursor o œ key to select HD and
then press the cursor key to switch the TV
to HD mode.
To return to TV mode, press the AV key,
select TV and validate with É key.
Using the HD menus
Press the MENU key to access the specific
settings of the HD mode. Use the cursor to
adjust them (the settings are automatically
saved):
Picture:
• Brightness: this changes picture brilliance.
• Colour: this changes the intensity of the
colour.
• Contrast: this changes the difference
between the light and dark tones.
• Sharpness: this changes the picture definition.
• Colour Temp.: this changes the colour
rendering: Cold (bluer), Normal (balanced)
or Warm (redder).
• Store: to store the picture adjustments and
settings.
iDTV 19141 Eng 17
Sound:
• Equalizer: to adjust the sound tone (from
bass: 120 Hz to treble: 10 kHz).
• Balance: this balances the sound on the left
and right speakers.
• Delta Volume: this is used to compensate
any volume discrepancies between the
different programs or EXT sockets.This
setting is available for programs 0 to 40 and
the EXT sockets.
• AVL (Automatic Volume Leveller): this is
used to limit increases in sound, especially on
program change or advertising slots.
• Dolby Virtual:To activate / deactivate the
surround sound effect.You can also access
these settings with key k.
• Store: this is used to store the sound
settings.
Features:
• Contrast + : automatic adjustment of the
picture contrast which permanently sets the
darkest part of the picture to black.
• NR : attenuates picture noise (snow) in difficult
reception conditions.
• Sleep (Only available on certain versions) : to
select an automatic standby period.
• PIP : to adjust the size and position of the
PIP screen.
• Horizontal Shift : to adjust the horizontal
placing of the image.
17/4/05, 3:13 PM
17