Fisher-Price Animal Sounds Farm 77973 Quick Start Manual

Battery Installation

Battery
Compartment
Door
• Locate the battery compartment on the underside of the base.
• Loosen the screw in the battery compartment door with a
Phillips screwdriver and remove the door.
• Insert three "AA" (LR6) alkaline batteries as shown in the
battery compartment.
Hint: We recommend using alkaline batteries for longer
battery life.
• Replace the battery compartment door and tighten the screw
with a Phillips screwdriver. Do not over-tighten.

One-Time Assembly

1
Base
• Align the three tabs on the end of the base extension
with the slots on the end of the base.
• Press firmly above each tab to snap the base
extension to the base.
Base
Base
Extension
Animal Sounds
Animal Sounds
Animal Sounds
Farm Farm
Farm
Product Number 77973
• Please keep this instruction sheet for future
reference, as it contains important information.
• Adult assembly is required.
• Requires three size "AA" (LR6) alkaline batteries
for operation (not included).
• Tool required for battery installation: Phillips
screwdriver (not included).
"AA" (LR6)
SHOWN ACTUAL SIZE
Battery Tips
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable (nickel-cadmium).
• Remove the batteries during long periods of non-use. Always
remove exhausted batteries from the toy. Battery leakage and
corrosion can damage this toy. Dispose of batteries safely.
• Do not dispose of batteries in a fire. The batteries may
explode or leak.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as recommended
in the Battery Installation instructions are to be used.
• If removable rechargeable batteries are used, they are only to
be charged under adult supervision.
• Rechargeable batteries are to be removed from the toy before
they are charged.
• If you use a battery charger, it should be examined regularly
for damage to the cord, plug, enclosure and other parts.
Do not use a damaged battery charger until it has been
properly repaired.
2
• Bend the fence so that it forms an "L" shape.
3
Slots
• Fit the four fence tabs into the slots in the base.
™
1.5V X 3
Fence
Tab