Table of Contents
Advertisement
5. Cleaning
•
Always switch off and unplug before cleaning.
Note: Do Not touch the mixing blade.
•
To clean the mixing blade, fill the beaker to the Max mark with warm water.
•
Insert the beaker as previously explained.
•
Operate the Milkshake Maker on "I" speed for 30 seconds.
•
Remove the beaker, unplug from the power point then dry the mixing blade and
shaft thoroughly with a dry cloth.
•
The beaker should be hand washed in warm soapy water.
Note: Do not put the beaker in the dishwasher.
•
To clean the Milkshake Maker body, wipe with a damp cloth.
•
Ensure the cloth is not excessively wet and that no moisture enters the motor
housing.
•
Do not use abrasive cleaners, petrol, any other flammable liquids or solvents to
clean the product.
NEVER IMMERSE THE MAIN BODY, CORD SET OR PLUG IN WATER.
6. Schematic Wiring Diagram
Page 7 of 11
Advertisement
Table of Contents
