Elcometer 138 User Manual page 19

A3: THE CONTROLS AND DISPLAY (continued)
9 10 11
J
CAL
MEAS
000. 0
IMO
16
ISO
Elcometer 138 Bresle Salt Meter Display
9 10 11
J
MEAS CAL
0000
EC
Elcometer 138 Conductivity Meter Display
www.elcometer.com
12
13
9
°C
BATT
10
2
µg/cm 14
11
15
12
13
12
13
14
°C
BATT
µS/cm 14
15
15
16
DISPLAY INDICATORS
Stability Icon Illuminates when measured value is stabilised.
MEAS Icon Illuminates when in measurement mode.
CAL Icon Flashes during calibration and illuminates steadily
when calibration is finished.
Temperature Flashes when the measuring environment
Alarm Icon temperature does not meet the specified operating
temperature of 5°C to 40°C (41°F to 105°F).
Battery Alarm Illuminates when the batteries are low and need to
Icon be replaced.
Measurement The default setting is:
Units Elcometer 138 Bresle Salt Meter: µg/cm
Elcometer 138 Conductivity Meter: µS/cm
Measured Value Elcometer 138 Bresle Salt Meter:
Displays the surface density of salts calculated
using the measured conductivity of the sample.
Elcometer 138 Conductivity Meter:
Displays the measured conductivity of the sample
Measurement Elcometer 138 Bresle Salt Meter only:
Mode Selected The surface density of salts is calculated using the
ISO Salt Mix (ISO Mode) or IMO PSPC (IMO
Mode) equivalent NaCI conversion factors, see
Section 3.4 on page en-6 for further details.
R
2
en-18