Figure 4-8 Rf Modulator Setup Menu - Motorola OM 1000 Installation And Operation Manual

To set up the RF modulator:
1
Select INTFC on the MAIN menu to display the INTFC menu.
2
Select 6 MOD to display the RF modulator setup menu illustrated in Figure 4-8:
Figure 4-8
RF modulator setup menu
A
D
3
Set the output signal frequency level required for your site configuration.
4
To set the RF-modulator mode:
Select OPERATE to enable the modulator to receive data and transmit a
QPSK-modulated signal, and then proceed to Spectrum Analyzer Procedure⎯Setting
the Modulator Output Signal Level in Operate Mode to measure and adjust the output
signal level.
Select 2T TEST to enable the modulator to generate and transmit a two-tone test and
then proceed to Spectrum Analyzer Procedure⎯Setting the Modulator Output Signal
Level in 2T Test Mode to measure and adjust the output signal level.
B C
E
OM 1000 Installation and Operation Manual
Setup and Operation 4-13