Media Player Functions; How To Connect The Usb Device To Ford Audio - Ford AUDIO Manual

603.95.321_Ford AUDIO_KA_GB_1ed
?
Using manual interaction, activate
the Main Menu of Ford Audio,
select the MESS. READER
option and then press SRC/OK
ß
or /MAIN. Select the option
SIGNAL TYPE and scroll down
through the available options with
the buttons N or O, select the
desired option and press SRC/OK
ß
or /MAIN.
} Or, using voice interaction:
Press } and say "Message
reader"; after the signal say
"Notification type"; Ford
Audio will list the available
options to you and you can make
a selection by saying "Reader off"
or "Visual and acoustic signal"
or "Visual signal only".
3/28/11 9:49 AM Page 27
MEDIA PLAYER
FUNCTIONS
The MEDIA PLAYER menu enables
the following:
Ì display tracks stored on your USB
device/iPod connected to the USB
port
Ì play the audio files stored on your
USB device/iPod connected to the
USB port
Note
Before using Media Player, read the
COMPATIBLE USB STORAGE
DEVICES section or the paragraph
regarding iPods in order to make sure
that your USB device is compatible with
Ford Audio.
HOW TO CONNECT THE USB
DEVICE TO Ford Audio
To connect your USB device to Ford
Audio, proceed as follows:
Ì Copy the tracks onto your USB
device.
Ì USB devices without USB wire: just
connect the USB device (directly or
by an extension lead) to the USB
port on the car (see fig. 1).
Ì USB devices with USB wire: use the
wire to connect the USB device to
the USB port on the car (see fig. 1).
Ì Turn the ignition key to MAR.
Ford Audio will start automatically
to play your digital tracks selecting
them from the library built at the
moment the USB device is
connected.
Ì If AUTOPLAY is set to "On",
Ford Audio will start playback
automatically.
For further information read chapter
SETTINGS FUNCTION – MEDIA
PLAYER.
When building the media library is
over, it will be possible to use Ford
Audio to select and play tracks.
Note
For the best use of Ford Audio it is
recommended to use USB devices with
maximum capacity of 32 GB.
27