Promix ™ Auto Models - Graco ProMix Auto Series Service Parts

™
ProMix Auto Models
Do not install equipment approved only for a non-haz-
ardous location in a hazardous area. Substitution of
components may impair intrinsic safety. See page 5.
™
ProMix™ Auto
Unit
Hazardous Location Approval
nly models with a G3000, G250 or G3000HR, G250HR for both
O
A and B meters are approved for installation in a Hazardous
Location - Class I, Div I, Group D, T3.
Non-hazardous Location Approval
Maximum Working Pressure
Maximum working pressure rating is dependent on the A and B meter and color change option selected. The pres-
sure rating is based on the rating of the lowest rated fluid manifold component. Refer to the component pressure
ratings below. Example: Model WP 1640 has a maximum working pressure of 3000 psi (21 MPa, 207 bar).
Check the ID plate on your EasyKey Display or fluid panel for its maximum working pressure. See F
page 7.
ProMix™ Auto Fluid Manifold Components Maximum Working Pressure
Wall Mount Fluid Panel Options:
Color Change Option 1, 2, 3 and 4...... 300 psi (2.1 MPa, 21 bar)
Color Change Option 5, 6, 7, and 8...... 3000 psi (21 MPa, 207 bar)
Coriolis A and B Meters Option....... 2300 psi (16 MPa, 159 bar)
No Meters or G3000, G3000HR...... 4000 psi (27.6 MPa, 276 bar)
Wall Mount Modules with Flow Control....... 200 psi (1.4 MPa 138 bar)
RoboMix II Panel Options (all).....190 psi (1.3 MPa, 131 bar)
Flow Meter Fluid Flow Rate Range
G3000, G250 Meter 75-3000 cc/min. (0.02-0.79 gal./min.)
G3000HR, G250HR Meter 38-1500 cc/min. (0.01-0.40 gal./min.)
Coriolis Meter 20-3800 cc/min. (0.005-1.00 gal./min.)
311189L
Enter Model number here
(See "ProMix Auto Smart Part Numbers" on page 4)
A & B Meters Color Options
Changing the fluid manifold configuration may change
its pressure rating. Do not exceed the pressure rating
of the lowest rated component. See page 5.
Catalyst
US C
Conforms to
FM std 3600 & 3610
ISSeP 06 ATEX 014
for use in Class I Div 1
Group D
T2 C Hazardous locations
[Ex ia] / x ia
CAN/CSA
22.2 No. 157-92
No. 1010.1-92
™
ProMix Auto Models
Flow Control
II 2 G
EEx ib IIA T3
IG
. 1,
3