Table of Contents
Advertisement
6
Using a standard Phillips No. 1 screwdriver, unscrew the
two outer screws that secure the memory module slot
cover.
Sample unscrewing the memory module slot cover
7
Remove the memory slot cover.
8
Place the screws and the cover in a safe place so that you
can retrieve them later.
Static electricity can damage the memory module. Before you
handle the module, touch a grounded metal surface to
discharge any static electricity you may have built up.
To avoid damaging the memory module, be careful not to
touch its pin connector on the side you insert into the
computer.
9
Remove the new memory module from its antistatic
packaging.
Avoid touching the connectors on the memory module or on
the computer. Grease or dust on the connectors may cause
memory access problems.
Getting Started
Adding memory (optional)
57
Advertisement
Table of Contents
