Toshiba 2400 User Manual page 48

48
Getting Started
Installing additional memory (optional)
CAUTION: Do not try to install a memory module under the
following conditions. You can damage the computer and the
module.
1. The computer is turned on.
2. The computer was shut down using Standby mode.
3. Power to the DVD-ROM drive has been turned on.
CAUTION: Do not install or remove a memory module while the
DVD-ROM drive power is on.
1 If the computer is on, turn it off. See
down command" on page
2 Unplug and remove any cables connected to the
computer.
3 Close the display panel and turn the computer upside
down.
"Turn Off or Shut
99.