Olymp LavaSit Selection Operating Instructions Manual page 8

1. Multifunction basin (Fig. 2)
a. Long hair basin with single lever mixing battery and hand spray
The intensity and temperature of the water jet are regulated by means of the mixer battery
•
lever.
b. Integrated holder for hair-dye beaker
Place the hair-dye beaker in the holder aperture.
•
c. Extra large hair sieve
To clean the hair sieve, remove it from the drain outlet by means of the handle.
•
d. Ergonomically designed neckrest with grips enabling easy tilting into position
By means of the grips, the customer can tilt the shampoo basin into the position most
•
comfortable for her.
e. Cleaning ceramic parts
Rub dry with a soft cloth or microfibre cloth.
•
Stubborn spots and calcified deposits should be removed using a mild cleansing agent.
•
On no account should abrasive cleansers or solvents be used!
•
2. Chair
The LavaSit Selection wash unit can be combined with various chair tops. The diagrams show only one
possible version.
A different chair top must only be fitted by authorised service personnel or an OLYMP technician.
The chair can be supplied without leg rest (Fig. 1) or with electrically extending leg rest (Fig. 6 + 7).
Operation of the leg rest:
Two buttons for stageless operation of the leg rest in and out are located below the wash basin. (Fig. 8)
• To extend:
• To return:
Press and hold down the
The leg rest will then stop automatically.
Press down and hold the
The leg rest stops automatically when the final position is reached.
CAUTION:
> The leg rest must only be returned when:
- the customer's legs are on the leg rest or
- no customer is sitting on the chair
> If the customer's legs are between the leg rest and the seat there is
danger of crushing when the leg rest is returned!
GB
button until the leg rest reaches its final position.
button until the leg rest is completely returned.
2