Table of Contents
Advertisement
LAUNCH
MAX 10bar
Description of Safety Signs
Caution should be taken
when separating the tyre
from rim. The bead breaker
shoe will move rapidly and
forcefully when the pedal is
depressed. Keep body and
materials away from the
work area.
If the clamping cylinder is
open
during
clamping,
squeezing on hands can be
resulted.
Remember to
keep hands away from the
inside of the tyre when
clamping.
High
voltage
power!
Dangerous!
This
is
where
the
compressed air gun is
connected with the air pipe.
Connect the compressed air
gun with the air connector.
The
pressure
of
the
compressed air should not
exceed 10bar.
iii
Tyre Changer (TWC-401NIC)
To prevent accidents from
occurring, make sure to
keep hands and other body
parts away when fastening
the mount/demount head or
when
the
turntable
running.
.
Be careful when connecting
and
disconnecting
source Bleed the air in the
cylinder completely when
maintaining the air pipes to
prevent
accidents
occurring.
Don't keep hands or other
body parts between the
clamping jaw and clamping
rim.
Before inflating check if the
clamping rim and the tyre
match each other, and if
they are in good condition.
Any negligence may result
in fatal explosion. Similar
accident may occur if the
inflating air exceeds the
allowed pressure.
is
air
from
Advertisement
Table of Contents
