TEC B-419-GS10 Owner's Manual page 35

2. PRINTER SETUP
2.10.4 Sensor Adjustments
(Cont.)
3. Click on the Yes button and the sensitivity of the transmissive
sensor will automatically be set as indicated by the "Now Adjusting"
window appearing as shown in the figure below.
Paper End Sensor
1.
The paper end sensor will detect when the print media has run out.
To adjust this sensor, remove the media from the printer and click on
the Adjust button for the paper end level sensor on the Sensor
Adjustment menu.
2.
The screen display shown in the figure below will appear.
3. Click on the Yes button and the sensitivity of the paper end sensor
will automatically be set as indicated by the "Now Adjusting"
window appearing as shown in the figure below.
2- 25
EO1-33030
2.10 Program Download