Connecting Your Tv; Connecting A Vcr - Toshiba TE50T11 Owner's Manual

Toshiba projection television owner's manual te50t11, te55t11
Table of Contents

Advertisement

Connecting your TV

If you haven't connected electronic equipment before, or you have
been frustrated in the past, you may wish to read this section. (Cables
are not supplied.)
• A coaxial cable is the standard cable that comes in from your
antenna or cable converter box. Coaxial cables use "F"
connectors.
• Audio and video cables are usually color coded according to use:
yellow for video and red and white for audio. The red audio cable
is for the stereo right channel, and the white audio cable is for
the stereo (or mono) left channel. If you look at the rear panel of
the TV, you will see that the terminals are color coded in the
same manner as the cables.
• S-video cables provide better picture performance. S-video cables
can only be used with S-video compatible components.
• ColorStream™ cables come in sets of three and provide the best
picture performance. ColorStream cables can only be used with
ColorStream compatible components.

Connecting a VCR

This connection allows you to watch local channels and video
programs, play or record on the VCR while watching TV, and to
record from one channel while watching another channel.
You will need:
• one coaxial cable
• one pair of audio cables (only one cable for a mono VCR)
• one video cable
Cable lead-in from Cable Box or Antenna
IN from ANT
OUT to TV
CH 3
CH 4
TV
)
ANT( 75
Stereo VCR
VIDEO
AUDIO
L
R
IN
OUT
OUT
VAR
S-VIDEO
R
L
AUDIO
VIDEO
Y
VIDEO
L/
L/
L
C
MONO
MONO
B
AUDIO
AUDIO
C
R
R
R
R
COLOR
STREAM
AUDIO
VIDEO-1 VIDEO-2
INPUT
IN
DVD IN
OUT
5
ANTENNA
Coaxial Cable
AUDIO
Cables
VIDEO
Cable
S-VIDEO
Cable
Color Stream
Cable
Caution:
Do not plug the TV in until you have finished
connecting all of your equipment.
Caution:
If using a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have a S-VHS VCR, use the S-video
connections and remove the video cable.
Do not connect the video cable and the
S-video cable to Video-1 simultaneously.
Note:
You can also use the Video-2 inputs for
connecting video components such as a
camcorder, laserdisc player etc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Te55t11

Table of Contents