Table of Contents
Advertisement
Adjusting the sound
Muting the sound
Press MUTE to temporarily turn off the sound. While the sound is
off, the screen will display the word MUTE in the lower right-hand
corner. To restore the sound, press MUTE again.
When you press the MUTE button, you automatically activate the
closed caption feature. To deactivate this feature, press the MUTE
button again. This feature only works when the closed caption mode
is set to off. See "Using the closed caption feature" on page 34 for
more information.
Selecting stereo/SAP broadcasts
You can enjoy watching TV while you listen to high-fidelity stereo
sound with the Multi-channel TV Sound (MTS) feature. MTS can
also transmit a second audio program (SAP) containing a second
language or other audio information.
When the TV receives a stereo or SAP broadcast, the word STEREO
or SAP appears on the screen when the TV is turned on, you change
the channel, or press the RECALL button.
The MTS feature is not available while in the VIDEO mode.
To listen to stereo sound:
1. Press MENU, then press x or • until the AUDIO menu
appears.
PICTURE
AUDIO
SET UP
PREMIUM
SBS
PREFERENCE
C.CAPTION
MTS
MONO
BASS
TREBLE
BAL ANCE
SPEAKERS
On
To end push EXIT
2. Press z or y to highlight MTS.
3. Press x or • to highlight STR.
PICTURE
AUDIO
SET UP
PREMIUM
SBS
PREFERENCE
C.CAPTION
MTS
STR
SAP MONO
BASS
TREBLE
BAL ANCE
SPEAKERS
On
To end push EXIT
You should leave your TV set to STR so you can automatically
receive stereo or monaural sound, depending on the broadcast
type. If the stereo sound is noisy, select MONO to reduce the
noise. The word STR or SAP is displayed in yellow when the TV
receives the signal, and highlighted in white when you have
selected the feature.
To listen to a second audio program:
1. Press MENU, then press x or • until the AUDIO menu
appears.
2. Press z or y to highlight MTS.
3. Press x or • to highlight SAP. You will hear only the second
audio program from the left and right speakers.
MTS
TV
CABLE
1
2
4
5
7
8
100
0
MENU/
FAV
-
ENTER
MUTE
RECALL TV/VIDEO SURROUND
STOP SOURCE
REC
TV/VCR REW
STILL LOCATE SWAP
NOTE:
The MTS button can also
be used to select Stereo, SAP or Monaural
sound.
36
POWER
TIMER
VCR
3
CH
6
9
VOL
CH RTN
ENT
ADV
MENU
FAV
+
y z x •
RECALL
ADV
MUTE
PLAY PIP
FF
Advertisement
Table of Contents
