Shaw HD Box Installation Instructions

Shaw HD Box.
Installation Instructions
A: Do you have everything?
The following components are included in the package that your HD box came in:
Cable Cord (Coax)
Shaw Remote
B: Time to hook up your new hardware
1.
Your serial number, "Host SN," is located on the back
of the HD box (next to the number three) and starts
with the letter "M." Alternatively, you can find the
serial number on the white sticker labeled "S/N" on
the HD box packaging.
Before you hook up your HD box, write your serial
number and account number below. You will need it
when you contact us to activate your new hardware.
Serial Number:
3. Screw one end of the
included white cable cord
(with silver ends) in to your
wall cable outlet and the
other end in to CABLE IN
on the back of the HD box.
For an optimal viewing
experience, we recommend
using the included cable
cord instead of any others
that you might have around.
(Approximate hardware setup time: 10 - 15 minutes)
Power Pack HDMI Cable
2.
Account Number:
IR Receiver + Tether Cord
(Optional Use)
Motorola HD Box
Find a location to put your new hardware that
will allow it to breathe.