Toshiba REGZA 32RV530U Owner's Manual page 18

@ 32 52RV530U EN.book Page 18 Wednesday, Janu_y 30, 2008 3:54PM
Connectinga digital audio system
The TV's DIGITAL AUDIO OUT terminal outputs aDolby ®*
Digital p,D_ or 2-channel down-mixed PCM (pulse-code
modulation) signal for use with an external Dolby <'_ Digital
decoder or other external audio system with optical audio
input.
You will need:
• optical audio cable (Use an optical audio cable that has the
larger "TosLink" connector and not the smaller "mini-
optical" connector.)
°°'°2:°°'
k
To control the audio:
1 Turn on the TV and the digital audio device.
2 Press M_u on the TV's remote control and open the Audio
menu.
3 Highlight Audio Setup and press @.
4
Digital Audio Selector
Audio Se!!ings ...............................................................
Advanced Audio Settings
In the Optical Output Format field, select either
Oolby Digital or PCM, depending on your device
(gW "Selecting the optical audio output format" on
page 46).
Note:
• Some audio systems may not be compatible with Do/by
Digital bitstream signals. Older audio systems that are not
compatible with standard optical out signals may not work
properly, creating a high noise level that may damage
speakers or headphones. THIS DAMAGE IS NOT COVERED
BY YOUR WARRANTX
• The DIGITAL AUDIO OUT terminal may not output some
digital audio sources because of copy restrictions.
* Manufactured under license from Dolby Laboratories.
Dolby, and the double-D symbol are registered trademarks of Dolby
Laboratories.
Connectingan audio system
This connection allows you to use external speakers with an
external analog audio amplifier to adjust the sound level.
You will need:
• standard audio cables
TVupperbackpanel _
F©i ©j _v'_°l /
To control the audio:
1 Turn on the TV and the stereo amplifier.
2 Minimize the sound volume from the TV's built-in
speakers and control the volume level using the
amplifier's remote control.
18
RV530U (E/F) Web 213:276