Connecting The Motor - THOMSON 500015 User Manual

D - INSTALLATION
Route the power cable.
Wires (power supply, antenna cables) must not be in contact with any mobile part.

4 - CONNECTING THE MOTOR

Safety instructions:
Cut out electrical power (circuit breaker in OFF position) before performing any operations. The installation
must be made by qualified personnel.
Connect the power cable to the mains using a cable of 2x0,75mm² min.
Important notes:
The power line must be used exclusively to power your motorised shutters and must be protected by a
fuse, circuit breaker or residual current device (30mA). Compliance with electricity safety regulations is
required.
OFF
24
EN
MOTORISED KIT WITH ARTICULATED ARMS
FOR SINGLE OR DOUBLE LEAF SHUTTERS
blue
brown
to the neutral
Conductor of
electric power
to the conductor
Phase electric
power