Learning About The Remote Control - Toshiba 51HX83 Owner's Manual

Learning about the remote control

The buttons used for operating the TV only are described here. For a
complete list of the remote control's functions, see the "Remote
Control functional key chart" on pages 18 –19.
turns the TV on and off
POWER
allows access to the automatic TV shut-off function (page 60)
SLEEP
The first press of the LIGHT button lights the keypad and turns
LIGHT
on the Illumination mode. With the Illumination mode on,
pressing any other key lights the keypad for 5 seconds (10 seconds
if you're in programming mode).
Subsequent presses of the LIGHT button toggle between turning
the Illumination mode on and off.
Channel Numbers (0-9, 100)
cycles through the six device modes: TV, CABLE/SAT, VCR,
MODE
DVD, AUDIO1, and AUDIO2. The mode indicator light will
remain lit for a few seconds (page 20).
cycles through the five pictures sizes: Natural, Theater Wide 1,
PIC SIZE
2, 3, and Full (page 40)
allows access to the favorite channel search function (page 47)
FAVORITE
allows access to the on-screen IR device control system
THEATER LINK
(page 31)
allows access to on-screen programming menus (page 25)
MENU
sets programming menu information (page 25)
ENTER
select or adjust programming menus (page 25)
yz x •
cycles through favorite channels (page 38)
FAV yz
cycles through programmed channels (page 35)
CH yz
adjusts the volume level
VOL yz
exits the programming menus (page 25)
EXIT
selects the video input source (page 58)
INPUT
mutes the sound (page 62)
MUTE
displays on-screen information (page 66)
RECALL
returns to the last viewed channels (page 37)
CH RTN
selects the POP (picture-out-picture) channel (page 44)
POP CH yz
turns the POP feature on and off (page 44)
SPLIT
allows access to the programmed channel search function (page 46)
CH SCAN
freezes the POP pictre (page 45)
FREEZE
switches the main and POP pictures (page 45)
SWAP
allows direct access to POP channels (page 44)
POP DIRECT CH
selects the POP picture source (page 44)
SOURCE
24
allow direct access to channels (page 35)
CT-90164
Note:
The error message "Not Available" will appear
if you press a key for a function that is not
available.