Advertisement
Available languages
Available languages
En g li sh
footwear and long trousers.
• Never allow children to use the appliance.
• Wear protective goggles while operating.
• If operating an appliance in a damp location
is unavoidable, use a Residual Current
Device (RCD) with a tripping current of not
more than 30mA protected supply. Use of
an RCD reduces the risk of electric shock.
• To prevent dust irritation, wearing of a face
mask is recommened.
• Disconnect the appliance from the mains
supply
- whenever you leave the machine;
- before cleaning a blockage;
- before checking, cleaning or working on
the appliance;
- if the appliance starts to vibrate abnormally.
• Store the appliance only in a dry place.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear eye protection.
Wear ear protection.
Keep bystanders away.
Switch off: remove plug from mains
before cleaning or maintenance.
Do not touch the fan.
DaTE CODE POSITIOn
The date code (H), which also includes the year of
manufacture, is printed into the housing surface that
forms the mounting joint between tool and battery.
Example:
2015 XX XX
4
Year of Manufacture
Package Contents
The package contains:
1 Blower
1 Dust Bag
1 Instruction manual
1 Nozzle
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and understand
this manual prior to operation.
Description (fig. 1,4)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
A.
Nozzle
B.
Blast Port
C.
Trigger Switch
D.
Variable Speed Knob
E.
Lock-On Button
F.
Suction Port
G.
Dust Bag
InTEnDED uSE
Your DWB6800 Blower has been designed for
blowing & cleaning applications, as well as light
suction purpose.
Electrical Safety
The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your D
WALT tool is double insulated;
e
therefore no earth wire is required.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D
WALT service organisation.
e
using an Extension Cable
If an extension cable is required, use an approved
extension cable suitable for the power input of this
tool (see Technical Data).The minimum conductor
size is 1.5 mm
; the maximum length
2
is 30 m.
When using a cable reel, always unwind the cable
completely.
Advertisement
