Focon Showtechnic EXPOLITE LED Profile 750 HD User Manual page 17

Setting DMX-Address
MENU
PERSON ADDRESS
The DMX start address of the fixture is set in the menu ADDRESS. This is retained even when
changing the personality.
Setting DMX-Personality
MENU
PERSON SETTING
The personality is set in the menu SETTING, submenu PERSONALITY. There are three different
modes which can be chosen: UNO (1 channel), DOS (2 channels), STD.P (3 channels).
Editing Static Scene
MENU
DIMMING
PERSON
The intensity for stand alone use of the fixture can be set in the menu DIMMING.
Choosing Run Mode
MENU
RUN MODE RUN
PERSON PERSON
The operating mode is set in menu RUN MODE. For operation on a DMX-controller DMX 512 needs
to be set. SLAVE sets the fixture into slave mode.
001 - 512 HSIC
PERSONALITY HSIC UNO
DOS
STD.P
0 - 100
DMX DMX 512 HSIC HSIC
HSIC SLAVE
E-17