Toshiba 37XV500A Owner's Manual page 24

Programme Timer
- digital only -
This function will set the TV to go to a specific channel at a
certain time. It can be used to view a particular programme, or
by setting the mode to daily or weekly, can be used to view a
series of programmes.
1
Press M, then Y or Z to select the PROGRAMME
menu.
2
Press V or U to select Timer, then press Q.
PROGRAMME
Channel List
Favorite Mode
Parental Rate
EPG
Timer
Alarm
Back Select Function
3
Press V or U to select an empty slot to programme a
timer or any existing programme to be edited, then press
Q.
Ch. No. Channel Name
0006 Channel 5 Weekly-Sat
0007 Channel News Asia Daily
0008 Channel 8 Daily
0009 Channel U Once
Back Select Function
4
Press V and U to select Ch. No. and Y or Z to choose
the channel you want. Press V and U to select Mode and
Y or Z to choose Once, Daily or Weekly. Then use the
Number buttons to set time for Date, Start and End in
24-hour format.
Timer Setting
Ch.No.
Channel News Asia
Name
Mode
Date
Start
End
Back Select Function
5 Press Q to save. If you have selected a locked channel or
activated Parental Rate, enter password when
prompted.
Note:
If the new entry causes a conflict with the existing entries
(i.e. overlapping recording time), the new entry will not be
saved.
To delete a selected entry:
Press the Red button, then use V or U to select Yes, then
press Q (All fields will be cleared).
24
Using the TV's features (General)
DIGITAL SETTINGS
On
No Block
Watch TV
Timer
Tuesday, 11 Nov 2008 06:44
Mode Date Start End
18 Nov 2008 20:30 21:00
11 Nov 2008 00:00 00:00
11 Nov 2008 00:00 00:00
11 Nov 2008 00:00 00:00
Edit Timer Delete Watch TV
0007
Once
11 Nov 2008
13:00
14:00
Enter
Notes:
• When a timed programme is about to start, an information
screen will appear indicating the change of current channel.
The menus and other channels will not be available during
the timed programme unless the programme timer is
cancelled. When the programme timer expires, the TV
switches to the channel from which it is switched from.
• If timer action occurs when the TV is in standby, the TV will
turn on but no picture is seen and no sound is heard.
Selected digital channel will be at the AV OUTPUT terminals
(- page 9). The selected channel can be watched or
recorded via the AV OUTPUT terminals.
• When the timer table is empty, the DTV timer LED (
8) will be off. When the timer table contains at least one
entry, the DTV timer LED will be set to red.
If timer action is in progress, the DTV timer LED will be
changed from red to yellow.
• If Menu or EPG is still open when timer action is scheduled
to start, the Menu or EPG will be closed automatically and
then the timer will start.
• The correct operation of the Timer depends on the
information received from Broadcaster's stream.
The time, and the deletion of service are examples of such
information. When broadcaster decides to delete any
channel, the respective entries will then be deleted from the
Timer-table.
It is not the malfunction of the TV.
Setting the Alarm
- digital only -
This function will turn on the TV to go to a specific TV mode
or channel at a certain time.
1
From the PROGRAMME menu, press V or U to select
Alarm, then press Q.
Mode
Time
TV mode
Channel
Back Select Function
2
Press V or U to select Mode and Y or Z to choose Off,
Once, Mon-Fri or Daily.
3
Press V or U to select Time and Y or Z to select time
for TV to wake up in 10-minute increments.
4
Press V or U to select TV mode and Y or Z to select
the TV mode or input source you want to adjust.
5
If TV mode is set to ATV or DTV, press V or U to select
Channel and Y or Z to select desired channel to be
turned on.
6
Press Q to save the above settings. If you have selected
a locked channel or activated Parental Rate, enter
password when prompted.
The 4 Alarm Timer LED on the front of TV lights in
green.
Notes:
• You must press Q to save the Alarm settings before you exit
the menu, otherwise all newly set values will be discarded.
page
-
Alarm
Off
11:30 AM
ATV
02
Enter