Resetting The Base Color Adjustment; Using The Active Backlight Control; Using The Cinema Mode - Analog Only; Using The Auto Format - Toshiba 37X3000A Owner's Manual

5 Press Z, then press Y or Z to select Hue, Saturation or
Brightness.
Hue
0
Red
6
Press V or U to adjust the settings as required.
Notes:
• If you select color management Off mode, this mode is not
available.
• In the PC input mode (- page 25), this mode is not
available.

Resetting the base color adjustment

The Reset function adjusts the base color adjustment to the
factory settings.
1
From the Base color adjustment menu, press V or U
to select Reset.
2
Press Q.

Using the active backlight control

In order to improve screen visibility, the active backlight
control sets the screen brightness automatically during dark
scenes.
1
From the PICTURE menu, press V or U to select
Active Backlight Control.
2
Press Y or Z to select On or Off.
Using the cinema mode
A movie film's picture runs at 24 frames a second, whereas
movie software such as DVD, etc., that you enjoy watching on
television at home runs at 30 (NTSC) or 25 (PAL) frames a
second. To convert this signal to reproduce a smooth motion
and picture quality, select the On mode.
Effective signal and setup conditions:
• When the Video input mode is selected.
• When the input signal format is 480i and 576i signals.
1
Press M, then press Y or Z to display the PICTURE
menu.
PICTURE
Picture settings
3D Color management
Base color adjustment
Active Backlight Control
Cinema mode
MENU Ba k EXIT
2
Press V or U to select Cinema mode, then press Y or
Z to select On or Off.
Note:
When a DVD movie with subtitle is playing back, this mode
may not work correctly.
Using the TV's features (General)
Saturation Brightness
0 0
- analog only -
OK
Off
On
On
Wat h TV

Using the auto format

When the TV receives a true HDMI signal picture and the auto
format is On, it will automatically be displayed in HDMI
signal format, irrespective of the TV's previous setting.
When in Digital TV, the display format will follow the
broadcasted format.
1
Press M, then press Y or Z to display the FUNCTION
menu.
FUNCTION
Teletext
Auto format
Blue screen
Side panel
MENU Back EXIT
2
Press V or U to select Auto format, then press Y or Z
to select On or Off.
Activating the ANT ATT (Antenna
Attenuation)
If the signal being received by the TV is too strong, this may
result in picture interference and/or buzzing sound. Setting
ANT ATT to On reduces signal strength, and can help to
remove the interference.
1
From SET UP menu, press V or U to select ANT ATT.
2
Press Y or Z to select On or Off.
Language
Auto tuning
Manual tuning
ANT ATT
AV connection
Picture position
MENU Back EXIT
Auto
On
On
1
Watch TV
SET UP
English
OK
OK
Off
OK
OK
Watch TV
21