Using The Srs Wow Surround Sound; Using The Stable Sound; Using The Bass Boost; Other Features Settings - Toshiba 37A3000A Owner's Manual

Using the SRS WOW surround sound

SRS WOW is a special combination of SRS Labs audio
technologies that creates a thrilling surround sound experience
with deep, rich bass from stereo sound sources. Your TV's
audio will sound fuller, richer and wider.
WOW consists of three features; SRS 3D, FOCUS, and
TruBass, being turned on.
1
Press M, then press I or i to display SOUND menu.
MTS
Dual
Bass
Treble
Balance
WOW
MENU EXIT
Back
2
Press u or U to select WOW, then press Q.
3
Press u or U to select an item you want to adjust, then
press I or i to adjust the settings as required.
SRS 3D
FOCUS
TruBass
MENU EXIT
Back
SRS 3D: To turn the surround effect On or Off.
FOCUS: To turn the vocal emphasis effect On or Off.
TruBass: To select the desired bass expansion level
(Off, Low or High).
Notes:
• If the broadcast is monaural, the SRS 3D effect does not
work.
®
• WOW, SRS and l symbol are trademarks of SRS Labs,
Inc.
• WOW technology is incorporated under license from SRS
Labs, Inc.
• The SRS WOW effect is active only when the sound outputs
from the speaker.

Using the stable sound

The Stable sound function limits the highest volume level to
prevent extreme changes in volume when the signal source
changes (for example, to prevent the sudden increase in
volume that often happens when a TV program switches to a
commercial).
1
From the SOUND menu, press u or U to select Stable
sound on the 2nd page.
Stable sound
MENU EXIT
Back
2
Press I or i to select On or Off.
Note:
The Stable sound effect is active only when the sound outputs
from the speaker.
18
Using the TV's features
SOUND 1/2
Auto
Dual 1
0
0
0
OK
Watch TV
WOW
Off
On
High
Watch TV
SOUND 2/2
Off
Watch TV

Using the bass boost

1 Press t to display Bass boost level.
Bass boost
2
While the Bass boost display is on the screen, press I
or i to adjust the Bass boost level.
3
To turn off the Bass boost, press t to display Bass
boost Off.
Bass boost
Note:
The Bass boost effect is active only when the sound outputs
from the speaker.

Other features settings

Selecting the timer menu

The Timer is especially useful if you want the TV to turn itself
on or off after a selected period of time.
1
Press M, then press I or i to display the TIMER menu.
Sleep timer
On timer
On timer Position
MENU EXIT
Back
2
Press u or U to select the required timer mode (Sleep
timer (Turn off the TV) or On timer).
The timer display will set by 10 minutes, up to 12 hours
and 50 minutes.
3
Press the Number buttons (0-9), I or i to set the On or
Off delay time, e.g. on in 30 minutes and On timer
Position 3 selected.
4
Press P to exit the menu. When setting the On timer,
press u or U to select the On timer Position and enter
the program position number you want to watch. Set the
Standby mode by pressing J on the remote control or 1
on the TV.
Activation of the Timer is indicated by the green "On-
timer indicator", on the front of the TV (- page 8).
Notes:
• The TV will automatically turn itself off after approximately 2
hours if you do not operate the TV after turned on by on timer
function.
• If you press and hold I or i to set the On or Off delay time,
the timer display will set by 30 minutes, up to 12 hours 30
minutes.

Using the auto format

When the TV receives a true HDMI signal picture and the auto
format is On, it will automatically be displayed in HDMI
signal format, irrespective of the TV's previous setting.
70
Off
TIMER
00:00
00:00
01
Watch TV