Selecting The Audio Out Sound; Using The Stablesound Feature - Toshiba 32HL83 Owner's Manual

Selecting the Audio OUT sound

This feature allows you to select the sound source (MAIN or POP)
that is output from the AUDIO OUT terminals.
This is useful when amplifying or recording the POP sound with
external equipment while hearing the sound of the main picture
through the built-in speakers. See "Connecting an audio system" on
page 17.
To select the Audio OUT sound:
1. Press MENU, and then press x or • until the AUDIO menu
appears.
2. Press y or z to highlight AUDIO OUT.
3. Press x or • to select MAIN or POP.
AUD O I
O N
SBS ON
SBS L E V E L 1 0 0
SPEAKERS ON /
AUD O OUT I MA I N/POP
STABLE SOUND
OFF
• MAIN: Outputs the sound of the main program through the
AUDIO OUT terminals.
• POP: Outputs the sound of the POP program through the
AUDIO OUT terminals.
Using the StableSound
The StableSound ® feature limits he highest volume level to prevent
extreme changes in volume when the signal source is changed (for
example, to prevent the sudden increase in volume that often happens
when a TV program switches to a commercial).
To turn on the StableSound
1. Press MENU, and then press x or • until the AUDIO menu
appears.
2. Press y or z to highlight STABLE SOUND.
3. Press x or • to select ON.
AUD O I
SBS O N
ON
SBS L E V E L 8 0
SPEAKERS O N
AUD O OUT I POP
STABLE SOUND /
ON OFF
To turn off the StableSound
Highlight OFF in step 3 above.
58
®
feature
® feature:
® feature:
Note:
Make sure the volume control of your audio
amplifier is set to a moderate listening level.
POWER
TV
LIGHT SLEEP
CABLE/SAT
VCR
1 2 3
DVD
AUDIO1
AUDIO2 4 5 6
MODE
7 8 9
PIC SIZE
+10
0
100/
ENT
ACTION
MENU
MENU
FAV
ENTER
yzx •
FAV
VOL
CH
EXIT
DVD CLEAR
DVD RTN
CH RTN INPUT RECALL MUTE
SLOW/DIR SKIP/SEARCH
Note:
When the POP is not on the screen, the
sound of the main program is output, even if
the POP sound is selected.