Learning About The Remote Control - Toshiba 32HL83 Owner's Manual

Learning about the remote control

The buttons used for operating the TV only are described here. For a
complete list of the remote control's functions, see the "Remote
Control functional key chart" on pages 19–20.
turns the TV on and off
POWER
allows access to the automatic TV shut-off function (page 53)
SLEEP
The first press of the LIGHT button lights the keypad and turns
LIGHT
on the Illumination mode. With the Illumination mode on,
pressing any other key lights the keypad for 5 seconds (10 seconds
if you're in programming mode).
Subsequent presses of the LIGHT button toggle between turning
the Illumination mode on and off.
allow direct access to channels (page 30)
Channel Numbers (0-9, 100)
cycles through the six device modes: TV, CABLE/SAT, VCR,
MODE
DVD, AUDIO1, and AUDIO2. The mode indicator light will
remain lit for a few seconds (page 21).
cycles through the five pictures sizes: Natural, Theater Wide 1,
PIC SIZE
2, 3, and Full (page 34)
allows access to the favorite channel search function (page 41)
FAVORITE
allows access to on-screen programming menus (page 26)
MENU
sets programming menu information (page 26)
ENTER
select or adjust programming menus (page 26)
yz x •
cycles through favorite channels (page 32)
FAV yz
cycles through programmed channels (page 29)
CH yz
adjusts the volume level
VOL yz
exits the programming menus (page 26)
EXIT
selects the video input source (page 50)
INPUT
mutes the sound (page 54)
MUTE
displays on-screen information (page 60)
RECALL
returns to the last viewed channels (page 31)
CH RTN
selects the POP (picture-out-picture) channel (page 38)
POP CH yz
turns the POP feature on and off (page 38)
SPLIT
allows access to the programmed channel search function (page 40)
CH SCAN
freezes the POP picture (page 39)
FREEZE
switches the main and POP pictures (page 39)
SWAP
allows direct access to POP channels (page 38)
POP DIRECT CH
selects the POP picture source (page 38)
SOURCE
Note:
The error message "Not Available" will appear
if you press a key for a function that is not
available.
E
F
S
25