Selecting The Picture Preference Mode; Using The Svm (Scan Velocity Modulation) Feature - Toshiba 32AF14 Owner's Manual

Selecting the picture preference mode

You can select from four picture preference modes—Sports, Standard,
Movie, and Memory—as described in the following table.
Mode Picture Quality
Sports Bright and dynamic picture (factory setting)
Standard Standard picture setting (factory setting)
Movie Movie-like picture setting (factory setting)
Memory Your picture adjustments (see note at right)
To select the picture preference mode:
1. Press MENU, and then press x or • until the PREFERENCE
menu appears.
2. Press z or y to highlight PICTURE PREFERENCE.
3. Press x or • to highlight the mode you prefer.
PREFERENCE
COLOR TEMPERATURE
[COOL] MEDIUM WARM
PICTURE PREFERENCE
[SPORTS] STANDARD MOVIE MEMORY
[ ] [ ]
MOVE SELECT

Using the SVM (scan velocity modulation) feature

The SVM feature enhances picture sharpness.
To turn on the SVM feature:
1. Press MENU, and then press x or • until the PICTURE menu
appears.
2. Press y or z to highlight SVM.
3. Press x or • to highlight ON.
PICTURE
CONTRAST 50
BRIGHTNESS 50
SHARPNESS 50
COLOR 50
TINT 0
SVM: [ON] OFF
RESET
[ ] [ ]
MOVE ADJUST
To turn off the SVM feature:
Highlight OFF in step 3 above.
Note: The SVM feature can sometimes make the picture look artificial. If SVM
is on, and you want the video material you are watching to look more natural, try
turning off the SVM feature.
26
Note:
The picture quality and color temperature
adjustments you make (see page 25) are
automatically saved in the MEMORY picture
preference mode.
When you make picture adjustments, the
picture preference mode automatically
changes to MEMORY.
yzx •
MENU