Toshiba VF-S15 Instruction Manual page 2

VF-S15 Option Adapter
Instruction Manual
1. Make sure that this instruction manual is delivered to the end user
of option adapter.
2. Read this manual before installing the option adapter. Keep it in a
safe place for reference.
3. All information contained in this manual will be changed without
notice. Please contact your Toshiba distributor to confirm the
latest information.
Safety Precautions
There is important information on the inverter and in its instruction manual for
proper use of the device to prevent injury to users or damage to property.
Read the instruction manual attached to the inverter to understand the
safety precautions, the symbols and indications completely.
Please observe the contents of these manuals at all times.
For detailed functions and operation of this unit, please refer to the inverter's
instruction manual (E6581611).
Limitation of use
Never use the option with any device other than VF-S15 inverter.
This will result in accident.
Prohibited
Handling in general
Never disassemble, modify or repair the option.
This can result in electric shock, fire or injury.
Disassembly
For repairs, call your Toshiba distributor.
prohibited
Do not put or insert any kind of objects into the option (electrical
wire cuttings, rods, wires etc).
This can result in electric shock or fire.
Do not splash water or any other fluid over the option, do not
touch the option with wet hands.
This can result in electric shock or fire.
Prohibited Do not apply shock (falling, etc.) on the option.
This can result in damage or malfunction.
Do not touch the connector to inverter (refer to the outline
drawing).
This can result in malfunction.
Turn off the power immediately in case of abnormalities such as
smoke, abnormal odor, noise.
Neglect of these conditions can result in fire.
For repairs, call your sales distributor.
Mandatory
Operate under the environmental conditions prescribed in this
action
manual.
Operations under any other condition can result in malfunction.
Disposal
If you dispose of the option, have it done by a specialist in
industrial waste disposal*.
Improper disposal can lead to explosion of noxious gases
resulting in accident.
(*) Persons who specialize in the processing of waste and known as
"Industrial Waste Product Collectors and Transporters" or
Prohibited
"Industrial Waste Disposal Persons." If the collection, transport
and disposal of industrial waste are done by someone who is not
licensed for that job, it is a punishable violation of the law (Laws in
regard to cleaning and processing of waste materials).
Wiring･Installation
Do not use the option if it is damaged or any part of it is missing.
Operating the defective product can result in electric shock or
fire.
For repairs, call your sales distributor.
Do not connect any communication device other than applicable
Prohibited communication options to the option adapter.
This can result in malfunction or accident.
Do not pull the cable and the connector connected to the option.
This can result in damage or malfunction.
The following steps must be performed before wiring and
installation.
Turn off all input power, wait at least 15 minutes, and confirm that
Mandatory
the charge lamp of inverter is no longer lit.
action
If steps above are not properly performed, this can result in
electric shock.
Ground must be connected securely.
If the ground is not securely connected, it could lead to
malfunction.
Be Grounded
Accessories
Option adapter is shipped together with the following accessories.
(1) User's manual......................................................1 copy
(2) DANGER label kit.................................................1 sheet
(3) Grounding wire.....................................................1 pcs
Notice
Warning
Warning
Caution
Warning
Manual
Mounting, wiring and removing
The mounting/removing of option must be performed without
supplying power(Turn off all input power,wait at least 15
minutes, confirm that the charge lamp of inverter is no longer lit).
Mandatory
The inverter and option can become damaged.
action
Do not use tool for the mounting/removing of option . The
inverter and option can become damaged.
After mounting option adapter, the depth of inverter is increased by 25.5mm
Mounting of option
Option adapter
Option
Option connector
cover
Remove the option
②
connector cover on control
terminal cover.
Earth wire wiring
Removing of option
Tab for
release
Product Specification
I t e m
Type form
Applicable model
Applicable option
Operation
Environment
Protection(IP code)
Warranty
Any part of the option adapter that is proved to be defective will be exchanged
under the following conditions:
1. This warranty applies only to the option adapter unit.
2. Any part of the option adapter which fails or is damaged under normal use
within 1 year from the date of delivery will be exchanged free of charge.
3. For the following kinds of failure or damage, the exchange cost shall be borne
by the customer even within the warranty period.
i) Failure or damage caused by improper or incorrect use or handling, or
unauthorized repair or modification of the option.
ii) Failure or damage caused by falling or an accident during transportation
after the purchase.
iii) Failure or damage caused by fire, salty water or wind, corrosive gas,
earthquake, storm or flood, lightning, abnormal voltage supply, or other
natural disasters.
iv) Failure or damage caused by the use of the option adapter for any
purpose or application other than the intended one.
4. All expenses incurred by Toshiba for on-site services shall be charged to the
customer, unless a service contract is signed beforehand between the
customer and Toshiba, in which case the service contract has priority over
this warranty.
Warning
* 3PH-200V 0.75kW inverter is shown in the picture.
Insert option into option adapter.
①
*Note.:
Mount option adapter to inverter after option
insertion.
Insert the option straightly and slowly along the
guide inside option adapter. Follow this
instruction, the connecter can become damaged.
Hang the hook of option
④
adapter on the control terminal
Lock the control
③
cover.
terminal cover.
Insert the connector in the
direction of arrow
Grounding terminal of option adapter
Recommended tightening torque: 0.5N・m
Connect attached grounding cable to
grounding terminal of inverter.
Grounding terminal of inverter
Remove the connector in
the direction of arrow while
pushing the release tab.
Remove an option in the
direction of arrow while
Tab for
pushing the release tab in
release
the lower direction.
Specification
SBP009Z
VF-S15
Please refer to VF-S15 instruction manual (E6581611).
In accordance with VF-S15
IP20 with communication option mounted and option
adapter mounted to inverter
E6581838③
Hook