Mustang Sunsetter Bag Manual

Advertisement

Sunsetter Bag 13323

Parts Included:

1 Sunsetter Bag
1 Rain Cover
1 Shoulder Strap
1 Y-Strap
In order to protect you and others from possible injury and/or property damage or loss,
please carefully read all instructions, warnings and attention notes regarding the use
and care of this product.
ATTENTION:
IGNORING WARNING NOTES DESCRIBED HEREIN CAN RESULT IN POTENTIAL
DEATH, SERIOUS INJURY OR MATERIAL DAMAGE AND MAY NEGATIVELY AFFECT
PRODUCT PERFORMANCE AND FUNCTIONALITY.
Strictly observe the following guidelines in order to use the product properly
and avoid potentially dangerous accidents.
CAUTION! Never exceed the manufacturer's recommended load capacity. Excess loading
on the luggage rack could cause damage to your motorcycle, loss or injury. Mustang is not
responsible for damage, loss or injury caused by exceeding the manufacturer's load capacity.

FOR MOUNTING/SECURING TO PASSENGER BACKREST

STEP 1 Read and understand all steps in the instructions before starting the installation.
Park the motorcycle on a hard, level surface and turn off the ignition.
STEP 2 To install the Sunsetter bag on a backrest, install the Y-strap as shown in PIC. 1.
STEP 3 Place the Y-strap over the backrest and insert it through the lower D-ring, secur-
ing the hook and loop as shown in PIC. 2.
STEP 4 Use the 8"straps and secure the bag around the arms of the backrest using the
lower D-rings as shown in PIC. 3.
STEP 5 If the backrest has a luggage rack, you also may use the additional straps on the
front of the bag under the flap for additional security.
Studded
13319
No Studs
2 Adjustable Straps with Hooks
2 8" x 1" Hook and Loop Straps
1 Installation Instructions
- Continued -

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sunsetter Bag and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Mustang Sunsetter Bag

  • Page 1 Park the motorcycle on a hard, level surface and turn off the ignition. STEP 2 To install the Sunsetter bag on a backrest, install the Y-strap as shown in PIC. 1. STEP 3 Place the Y-strap over the backrest and insert it through the lower D-ring, secur- ing the hook and loop as shown in PIC.
  • Page 2 Your warranty is automatically activated on date of purchase. If a product appears defective, call Mustang to obtain a Return Merchandise Authorization form (RMA). All returns must be carefully packed to avoid shipping damage; you are re- sponsible for return shipping charges.

Table of Contents