Chapter 3: Using The Remote Control; Preparing The Remote Control For Use; Installing The Remote Control Batteries; Remote Control Effective Range - Toshiba 26HLC56 Owner's Manual

Toshiba lcd tv monitor owner's manual
Hide thumbs Also See for 26HLC56:
Table of Contents

Advertisement

Preparing the remote control
for use
Your monitor's remote control can operate your monitor and
many other devices such as cable converter boxes, satellite
receivers, VCRs, DVD players, and HTIBs (home theater in a
box), even if they are different brands.
If you have a Toshiba device:
Your monitor's remote control is preprogrammed to operate
most Toshiba devices (- page 20).
If you have a non-Toshiba device or a Toshiba device
that the remote control is not preprogrammed to
operate:
You can program the monitor's remote control so it will
operate the other device (- pages 18–22).
Installing the remote control
batteries
1
Remove the battery cover from the back of the remote
control.
Squeeze tab
and lift cover.
2
Install two "AAA" size batteries, making sure to match
the + and – signs on the batteries to the signs on the battery
compartment.
3
Reinsert the battery cover in the remote control until the
tab snaps.
16

Chapter 3: Using the remote control

Caution: Never throw batteries into a fire.
Note:
• Be sure to use AAA size batteries.
• Dispose of batteries in a designated disposal area.
• Batteries should always be disposed of with the
environment in mind. Always dispose of batteries in
accordance with applicable laws and regulations.
• If the remote control does not operate correctly, or if the
operating range becomes reduced, replace batteries with
new ones.
• When necessary to replace batteries in the remote control,
always replace both batteries with new ones. Never mix
battery types or use new and used batteries in combination.
• Always remove batteries from the remote control if they are
dead or if the remote control is not to be used for an
extended period of time. This will prevent battery acid from
leaking into the battery compartment.

Remote control effective range

For optimum performance, aim the remote control directly at
the monitor and make sure there is no obstruction between the
remote control and the monitor.
Point remote control
toward remote sensor
on front of monitor.
16.4 ft (5m)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

32hlc5637hlc56Hlc56Vx1a00011000

Table of Contents