Using The Lock Menu; Locking Channels; Setting The Gametimer; To Set The On Timer - Toshiba 20AS26 Owner's Manual

USING THE LOCK MENU

The LOCK menu includes the CH LOCK, VIDEO LOCK, GAMETIMER and CHANGE PASSWORD functions.
You can use these functions after entering the correct PASSWORD. (This password is the same one selected under "SETTING THE
V-CHIP" on page 10.)

LOCKING CHANNELS

With the CH LOCK feature, you can lock specific channels. You will not be able to tune locked channels unless you clear the
setting. You can choose to lock up to nine TV channels and nine cable channels.
1
Use the Channel Number buttons (0–9) to display the
television channel you wish to lock.
2
Press MENU, then press SET + or – until the indicator
next to "LOCK" begins to flash. Then press ENTER.
Use the Channel Number buttons (0–9) to enter your
3
password, then press ENTER.
The LOCK menu appears.
Press SET + or – until the indicator next
4
to "CH LOCK" begins to flash, then
press ENTER.
Press SET + or – to select:
5
• INPUT to select the channel as one to
be locked. Then press ENTER.
• ALL CLEAR to clear all channels from
the list of locked channels. Then press
ENTER.
LOCKING VIDEO INPUT
With the VIDEO LOCK feature, you can lock out the input
source (VIDEO) and channels 3 and 4. You will not be able to
select the input sources with the TV/VIDEO button or Channel
buttons unless you clear the setting.
Press MENU, then press SET + or – until the indicator
1
next to "LOCK" begins to flash, then press ENTER.
Use the Channel Number buttons (0–9) to enter your
2
password, then press ENTER. The LOCK menu appears.
Press SET + or – until the indicator
3
next to "VIDEO LOCK" begins to flash,
then press ENTER.
4
Press SET + or – to select:
• OFF: Unlocks all video input sources.
• VIDEO: Locks VIDEO.
• VIDEO +: Locks VIDEO, channel 3 and channel 4.
This option should be used if you use the antenna
to play a video tape.
5 Press MENU repeatedly until the menu screen is cleared.
NOTE:
After programming VIDEO LOCK, change channels or press the
TV/VIDEO key before turning off the television.

TO SET THE ON TIMER

This feature allows you to program the TV to turn on automatically at a set time and channel.
NOTE: After a power failure or disconnection of the power, the timer setting will be lost.
1
Press MENU, then press SET + or – until
the indicator next to "ON TIMER" begins
to flash. Then press ENTER.
The ON TIMER menu appears.
2
Press SET + or – to set the desired hour (0–12), then
press ENTER.
3
Press SET + or – to set the desired minute
(00, 05, 10, ...55), then press ENTER.
3X30321A[E] P08-12
LOCK
CH LOCK
VIDEO LOCK
GAME TIMER
CHANGE PASSWORD
〈 + / – / ENTER / MENU 〉
CH LOCK
CABLE
INPUT
--- --- ---
--- --- ---
--- --- ---
ALL CLEAR
〈 + / – / ENTER / MENU 〉
VIDEO LOCK
OFF
VIDEO
VIDEO+
〈 + / – / ENTER / MENU 〉
ON TIMER
HOUR 00h
MINUTE 00m
CH 002 CANCEL
〈 + / — / ENTER / MENU 〉
11
6 Repeat steps 1 through 5 to lock other channels. When you
are finished locking channels, press MENU repeatedly until
the menu screen is cleared.
If you try to tune a locked channel, the TV will not display it, but
will display the nearest unlocked channel.
NOTES:
• If you are accessing the LOCK menus or V-chip menus for the
first time, choose a four-digit number to be your password.
• After programming CH LOCK, change channels before turning
off the television.
• If you want to unlock channels, select ALL CLEAR in step 5,
then press ENTER.

SETTING THE GameTimer

With the GameTimer TM feature, you can automatically activate
the VIDEO LOCK feature (VIDEO setting) to set a time limit for
playing a TV game (30, 60, 90, or 120 minutes).
1 Press MENU, then press SET + or – until the indicator next to
"LOCK" begins to flash, then press ENTER.
Use the Channel Number buttons (0–9) to enter your pass-
2
word, then press ENTER. The LOCK menu appears.
3 Press SET + or – until the indicator next to
"GAMETIMER" begins to flash, then press
ENTER.
Press SET + or – to select a time limit
4
(30 minutes, 60 minutes, 90 minutes,
120 minutes or OFF).
Press MENU repeatedly until the menu screen is cleared.
5
After the GameTimer is programmed, the display will appear
briefly every ten minutes to remind you that the GameTimer
is operating. When the programmed end time is reached,
the display will change the channel automatically.
NOTE:
When the programmed end time is reached, the TV will change
channels automatically and the VIDEO LOCK feature will be
activated. To turn off the VIDEO LOCK, see "LOCKING VIDEO
INPUT," at left.
4
Press SET + or – to set the desired
channel, then press ENTER.
5
Press SET + or – to select the SET mode, then press ENTER.
6
Press MENU repeatedly until the menu screen is cleared.
NOTE:
To cancel the ON TIMER, select CANCEL in step 4 above. Press
MENU repeatedly until the menu screen is cleared.
22/12/05, 4:38 PM
TM
GAME TIMER
OFF
30
60
90
120
+ / Ð / ENTER / MENU
〈 〉
ON TIMER
HOUR 08h
MINUTE 15m
CH 125 SET
〈 + / — / ENTER / MENU 〉
11