Akai APRC-108 User Manual page 8

Bluetooth OPERATION:
This unit can receive stereo audio signal from a Bluetooth stereo audio device.
1. Power on the unit, switch to Bluetooth mode by pressing FUNCTION button repeatedly.
2. Enable the Bluetooth of the Bluetooth audio source device.
3. Pair and connect to "
enter "0000".
4. When pairing and connecting is successful, it will listen to one voice sound from unit.
5. During playback, press PLAY/PAUSE/PAIR button to pause or resume the playback.
6. During playback, Press NEXT or BACK button to skip to next track. Or go back to previous
track.
Note:
•
The above are general steps to pair a Bluetooth device, for more specific instructions on
Bluetooth connectivity for your device, please consult your manufacturer's manual.
•
Once the unit enters to the Bluetooth mode, it will connect to the last paired external
Bluetooth device automatically.
After switching to Bluetooth mode, it will auto-enter into Pairing mode if no any Bluetooth
connection.
AUX IN:
1. Connect the AUX IN jack on the unit to an audio source, for example, MP3 player with an audio
cable.
2. Press the FUNCTION button repeatedly to switch to AUX mode.
3. Use the native controls on the connected audio device to begin playing music through the
connected unit.
4. Adjust device volume level and unit level to desired your volume level
Power Off Erp2 function:
When the unit idle on CD /AUX/ USB mode over 10 min. Then the unit will switch into standby
mode automatically
APRC-108
.
" (the unit) on the audio device. If prompted for password,
EN-8