Table of Contents
Advertisement
OBJ_BUCH-821-004.book Page 14 Wednesday, February 10, 2016 8:48 AM
14 | English
Intended Use
The measuring tool is intended for swift finding of pulsating laser beams.
Technical Data
Laser Receiver
Article number
1)
Working range
Receiving angle
2)
Measuring accuracy
– "Fine"
– "Coarse"
Operating temperature
Storage temperature
Battery
Operating time, approx.
Weight according to EPTA-Procedure 01:2014
Degree of protection
Dimensions (length x width x height)
1) The working range can be decreased by unfavourable environmental conditions (e.g. direct sun
irradiation).
2) Depends on distance between laser receiver and line laser
The measuring tool can be clearly identified with the serial number 12 on the type plate.
Product Features
The numbering of the product features shown refers to the illustration of the measur-
ing tool on the graphic page.
1 Button for selecting the measuring accuracy
2 On/Off button
3 Audio signal button
4 Display
5 Magnet plate
6 Direction LED "move downward"
7 Centre-indication LED
1 609 92A 269 | (10.2.16)
LR 2
3 601 K69 100
5–50 m
90°
±1 mm
±3 mm
–10 °C...+50 °C
–20 °C...+70 °C
1 x 9 V (6LR61)
30 h
0.27 kg
IP 54 (dust and splash water
protected)
74 x 41 x 150 mm
Bosch Power Tools
Advertisement
Table of Contents
