Page 1
AI16 Analog Input Card For Mix Rack Digidesign 2001 Junipero Serra Boulevard Daly City, CA 94014-3886 USA tel: 650·731·6300 fax: 650·731·6399 Technical Support (USA) tel: 650·731·6100 fax: 650·731·6375 Product Information (USA) tel: 650·731·6102 tel: 800·333·2137 International Offices Visit the Digidesign Website...
® to the Digidesign Mix Rack. The following are required to use the AI16 Card with your in- stalled and configured VENUE system: • Digidesign Mix Rack AI16 Card Components • D-Show software version 2.7 or higher The AI16 Card includes the following items: •...
Conventions Used in This Guide All Digidesign guides use the following conventions to indi- cate menu choices and key commands in D-Show and Pro Tools: Convention Action File > Save Session In Pro Tools, choose Save Session from the File menu.
A, B, & C Installing an AI16 Card Your Mix Rack has three available input slots: slots A, B, and C. You must install the AI16 Card in one of these three in- put slots. To install an AI16 Card: Shut down the VENUE system, and turn off power to the Mix Rack.
AI16 Card. The Hub48 board’s five ribbon cables connect to the Input and If you want to replace an AI16 Input Expansion Card in your Output Expansion Cards. Mix Rack, you must first remove a card.
Completing and Confirming to see your Mix Rack’s Input and Output Card configuration. Installation AI16 Cards appear in slots A, B, and C of the pop-up menu as “Analog Input Card”. To complete and confirm installation: Reattach the Mix Rack’s front panel.
Chapter 3: Specifications Audio Specifications AI16 Analog Mic/Line Inputs Parameter Specifications Limit Units Condition/ Comment Type Balanced, XLR3-Female Gain +10 to +60 6 dB analog steps with 0.1 dB dig- ital increments and crossfade at analog relay switch point Max Input Level...